The answers and queue Home
The answers and queue Home is a second layout for the Home screen. The classic Home shows tiles by type of data. This Home starts with the three questions a kitchen asks every day. Then it shows the work that needs a person, and what other people and Rinvy did since your last visit.
From top to bottom, it has these parts:
- Three answer cards: enough until the next truck (or until you restock), food cost on target, and today on track.
- Needs you: a queue of proposals, with the Needs attention rows under it.
- Handled: what got done since you last looked.
- This week: the classic tiles and the sales chart, as the numbers behind the answers.

Switch Home in Kitchen settings
Owners and managers choose which Home the kitchen uses. The choice is for everyone in the kitchen, not for one person.
Open Kitchen settings.
- In the Kitchen panel, find the Home section.
Turn on Answers and queue Home. The change saves at once. Home changes on your next visit.
- To go back to the classic Home, turn the switch off.
While the switch is on, the Home section also shows three fields. They save with Save changes at the bottom of the panel:
- Food cost target: the percent the food cost card reads against. If you leave it empty, Rinvy uses 30%.
- Opens and Closes: when the day line on the today card starts and ends. The default is 6 AM to midnight. If you close after midnight, set a close time at or before the open time.

Staff and viewers do not see the Home section. See Kitchen settings.
The three answer cards
Each card gives a short answer, a line of detail and a trust line. The trust line tells you what the answer rests on, for example "Counted today" or "sales complete". The color of the card shows its state, and the text says it too:
| State | Color | Meaning |
|---|---|---|
| Good | Green | Nothing to do. |
| Warning | Yellow | Something needs a decision today. |
| Critical | Red | Something is already late, out or far off target. |
| Cannot say | Gray | Rinvy does not have the data for an honest answer. |
A chip on a card counts the proposals that answer its question. Tap the chip to scroll the queue to those rows.
Enough until the next truck?
This card compares each product's days of stock with the operating days until its supplier's next truck. It uses the same numbers as the order list.
- Critical: a product is out. A product counted at zero is out. A product that was never counted is low, not out. The card is also critical when an order cutoff passed today and a product runs out before the next truck the order can still make, for example "3 products won't make Fri, Nov 13, a cutoff passed".
- Warning: a product runs out before its truck, or an order is due today. The headline says by when, for example "Covered if you order by 2 PM". The card also warns when a cutoff passed with lines unordered ("Sysco's cutoff passed"), and when a product may run out but its supplier has no delivery schedule, or the product has no supplier ("2 products may run out, no delivery schedule"). Rinvy times an order from the supplier's delivery days. Set the delivery days on the Suppliers page, and give the product a supplier on its purchase option.
- Good: "Covered for now". Nothing runs out before the next truck.
A supplier you pick up from
For a supplier you pick up from, such as a grocery store, there is no truck. The card reads the next store run instead:
- If your kitchen has a supplier you pick up from, the card asks Enough until you restock?.
- When a run is due today, the headline reads "Covered if someone goes to Grocery Store today". The card names what runs out by tomorrow and how many items one run covers.
- When the list holds only products below par, no run is due yet. The card says, for example, "3 products below par. No Grocery Store run needed yet."
- When a product runs out before your next shopping day, the card warns, for example "Napkins won't make Thu's Costco run". A store is open any day, so you can go sooner.
The card cannot say when the kitchen has no count yet, or when the last count is too old to trust. The button on the card starts a count. A viewer cannot open the order list, so for a viewer this card always reads "Can't say for this role".
If the order list or another source did not load, the card says "Couldn't check stock right now" and has no button. Home also shows "Part of your kitchen didn't load". Refresh in a minute.
Food cost on target?
This card shows your actual food cost between your two latest counts, against your target. Its headline reads, for example, "32.4% · 2.4 pts over target". The card is good at or under the target, a warning up to 5 points over it, and critical past that.
Under the headline, the card names what moved the number in the period: logged waste, a gap over what your recipes say the food should cost, dishes over their own target, or a price rise on a receipt. Over target, the line starts with "Where it went". Under target, it starts with "Worth a look".
The card cannot say in these cases, and its button fixes each one:
- The kitchen is on the Free plan. Actual food cost needs the Standard plan.
- The kitchen has fewer than two counts. A food cost period runs from one count to the next.
- The period has no sales, or sales are missing for some days. Connect Toast, upload sales, or type the net sales for the period. If your kitchen already has Toast connected, the card does not tell you to connect it. It asks for the net sales of the missing days. If your Toast sync is off, the card tells you to turn it on. Rinvy turns the sync off after it fails several times in a row, for example after your Toast password changes. When one day is missing, the card names it, for example "Can't say, Tue, Nov 3 has no sales". When more days are missing, it names the first three.
A day that Toast synced and found no sales for is a closed day, not a missing day. Days your operating days mark as closed never count either.
A count taken this morning before the kitchen opens counts the day before, so today is not a missing day. The period ends the day before, and today's sales belong to the next period.
Only people who can see costs and open Reports see this card. See food cost.
Today on track?
This card counts what needs you today and how many of those are late. Its day line runs from the open time to the close time. It marks order cutoffs, trucks received today and trucks still due. A receipt from a supplier you pick up from shows as a run, for example "Grocery Store run". A store run has no cutoff. A cutoff that passed turns red. When nothing waits, the card says "Nothing waiting on you", "Nothing waiting, but a count is due", or "Nothing waiting, but a cutoff passed".
Needs you
The queue lists proposals: work that Rinvy prepared for a person to approve or do. Each row starts with a verb, names the question it answers (Stock, Food cost or Today), and shows the evidence and the money it involves. A chip shows when it is due.
| Proposal | Primary action | What the review sheet does |
|---|---|---|
| Order from a supplier | Review order | Shows each line and its quantity. You can change a quantity. Mark as ordered places the order. |
| Shop at a store you pick up from, for example "Shop at Grocery Store" | Review list | Shows each line and its quantity. You can change a quantity. Take shopping list saves the list for today's run. |
| Receive a delivery whose invoice is in, for example "Receive Sysco delivery" | Receive | Shows every line, fee, deposit and tax. Receive books it as received today. |
| Approve tonight's pulls | Review pulls | Shows each pull. Approve list schedules the work. No stock moves until a cook checks a row off. |
| Buy a product from a cheaper option, for example "Buy Romaine from Sysco" | Review switch | Shows the default option and the cheaper one, each priced per counting unit. Make it the default makes the cheaper option the product's default. |
| Match an invoice, a delivery to receive, a prep list, an open count, a sales upload | Open | Opens the page where the work happens. |
| Run this week's forecast | Open forecast | Opens the Forecast page, so you can add context before you run it. |
The primary action never writes on its own. It opens a review sheet that reads the lines fresh. Nothing is ordered or received until you confirm in the sheet. Change and Open full page open the full page, for example the order list, when you want more than the sheet offers.

When an invoice shows
Suppliers often email an invoice before the truck comes. So a matched invoice asks you to receive the delivery, not to approve the invoice. If the invoice is linked to an order, its row shows on the day the order is due, and turns late after that day. Before that day it waits on the Receive page and does not count as something that needs you. If the invoice has no order, its row shows on the day it arrives. For a store you pick up from, the row says "Log Grocery Store run". An invoice with a line that is not matched always shows as "Match Sysco invoice", with your supplier's name.
How an order is sized
An order row uses the Start from choice that your kitchen saved on the order list. The order reminder and the classic Home use the same choice, so they all show the same order.
| Saved choice | How Rinvy sizes the order |
|---|---|
| Order to par | It tops each product up to par. |
| Sales expectations | It uses the current sales forecast, plus the buffer for the forecast's usual miss. |
| Burn rate or Blank | It uses the usage over the lookback days. |
Sales expectations needs a forecast whose dates have not ended, on the Pro plan. Without one, Rinvy sizes the order from usage. The first line of the review sheet tells you what sized the order, for example "Rinvy topped each item up to par".
The stock card and the row's "runs out" evidence always come from usage, whatever sized the order. Par alone cannot tell when a product runs out.
Change and Open full page open the order list in the same choice, with the same forecast. A person who cannot open Reports cannot read forecasts. For that person, a forecast-sized order opens the order list in Burn rate.
The forecast row shows for owners and managers on the Pro plan, in a kitchen that ran a forecast in three different weeks of the last five. It shows when no forecast covers the next service day. If your sales stop before your last open day, the row tells you to sync sales first. A day that Toast synced and found no sales for does not count as behind. When the next service day falls in next week, it says "Run next week's forecast". It leaves the queue after you run a forecast that covers that day.
In such a kitchen, a pull row says when no forecast covers its day, and ends with "Sized from par." An order row says it only when your saved choice is Sales expectations. It then names what sized the order:
- With no current forecast: "Sized from usage.", for example "No forecast for Tue, Nov 10. Sized from usage."
- With a current forecast that stops before that day: "Sized from the current forecast."
Each person sees only the proposals their role can act on. A viewer sees none.
New rows
A row you have not seen yet has a dot before its title. The header of the queue shows how many rows are new, for example 2 new.
A row counts as seen when it shows on your Home screen. A row behind See all counts as seen only after you open the full list. Seen rows are kept for each person, not for the kitchen. The dots stay until you leave Home, so you can still find what was new. On your next visit, they are gone.
Pushes that open Home
Two push notifications open Home on the row they are about: the order reminder and "Invoice Ready for Review". Home scrolls to the row, and opens the full queue when the row is behind See all. A reminder for more than one supplier opens the row of the first supplier. If the row left the queue, for example because a teammate approved it, Home scrolls to the queue.
In a kitchen on the classic Home, these pushes open the order list and the receiving page, as before.
The number on the app icon
In the phone app, the number on the app icon also counts the new rows in Needs you. Hidden rows do not count. Order rows and the forecast row do not count either, but they still get a dot on Home.
Switch to a cheaper purchase option
This row answers the food cost card. Rinvy proposes a switch when a product has an active price alert and another active purchase option of that product is at least 5% cheaper per counting unit than the default. The row says how much the price moved and how much cheaper the other option is, for example "Price moved +12.0% · 8% cheaper per lb than US Foods". When Rinvy knows your usage, the row also says about how much the switch saves in a year.
The review sheet reads both options fresh. If the default changed, the other option was turned off, or it is no longer cheaper since Home loaded, the sheet says so and there is nothing to switch. If only a price moved and the option is still cheaper, the sheet shows the new prices. The saving uses your last 30 days of usage. With no usage, the sheet says it cannot tell what the switch saves in a year.
Make it the default changes what the order list suggests, and the product's supplier and case cost. Past receipts keep their prices. Open full page opens the product on the Products page.
Only owners and managers see this row, because it needs costs and the right to edit products.
Not now
Not now hides a row for the whole kitchen until the next business day. Then it comes back if the work is still open. It does not hide the row for you alone, so use it only when nobody needs to act on it today.
Staff cannot hide orders, invoices or deliveries, because those rows involve money. Only owners and managers can hide them.
Hidden rows are not lost. A line under the queue counts them, for example 2 hidden. Tap it to see each row, who hid it and until when, for example "Hidden by Ana until tomorrow". Tap Undo to bring a row back. You see Undo only on rows you are allowed to hide.
A hidden order leaves the queue, but its products can still run out. So the stock card still counts it and says so, for example "The order is hidden from Needs you until tomorrow". Its cutoff stays on the day line, marked "(hidden)".
Needs attention
Under the queue, the Needs attention and Worth a look rows work as they do on the classic Home. See dashboard customization.
Handled
The Handled lane shows what got done since your last visit to Home, one card per person or source:
- Rinvy, for work it did on a rule.
- Toast, for sales that synced.
- Each teammate, and you.
- via Claude, for writes made through the Claude connector.
Each card shows a count and the most important thing that person did. Tap a card to see every row. Tap a row to open its record, for example the count or the order history. An order placed with a supplier shows as "Ordered from Sysco · 4 items", with the total when you can see costs. An order or invoice approved from the queue shows once, as the order it placed or the delivery it received, with the supplier's name, for example "Received Sysco delivery". For a store you pick up from, it shows as "Grocery Store run logged" or "Took the Grocery Store shopping list". An approved pull list shows as "Approved tonight's pull list". A switch made from the queue shows as "Switched a default purchase option". A row shows the time it happened. If it was dated to an earlier day, for example waste you logged for last week, it shows that day instead, such as "Oct 27". A missed prep you confirmed shows as "Logged a missed prep: Tzatziki Sauce", with the day it fills in your count history. With no recorded visit, the lane covers the last 24 hours. It never goes back more than 7 days. On a phone, the cards fold to an avatar and a count.
This week
This week holds the tiles, the sales chart, highlighted products and recent activity from the classic Home, with the same figures. On a phone, the section is folded while the queue has rows. Tap This week to open it.
Common mistakes
Using Not now as a personal snooze
Not now hides the row for everyone in the kitchen until the next business day. If a teammate still needs to act today, leave the row.
Reading a gray card as good news
A gray card means Rinvy cannot answer, not that all is well. Tap its button, if it has one, to give it what it needs, usually a count or sales. A card that says "Couldn't check" has no button. Refresh in a minute.
Setting the close time to 11:59 PM for a late night
If you close after midnight, set the real close time, for example 2 AM. A close at or before the open time means the day crosses midnight.